Product specifications

SPP-R210 Command Manual
Rev. 1.00 BIXOLON
- 98 -
■ Modes 2 and 3 are executed according to the following procedures:
(RS, GS indicates the control code of MAXI CODE. y indicates the 2-byte numeric data.)
a) 9-byte data including ” [)>”,”RS”,”01”,”GS”,”yy” are regarded as the Header.
• The next data following the Header is the Primary Message.
• When printing, the Header is placed at the beginning of the Secondary Message.
b) When Header data is absent, the data is regarded as Primary Message.
c) In the Primary Message, GS is used as the separator that divides message into Postal code, ISO country code,
and Class of service. This GS is ignored.
d) All data of the Secondary Message is regarded as symbol data.
■ In mode 4, 5, 6, all of the data in the symbol storage area is regarded as Primary Message and Secondary Message.
■ For error correction codeword, the Reed-Solomon algorithm is employed.
■ The following data is automatically added during the encoding process:
• Position sensor pattern
• Position pattern
• Error correction code text
• Mode separator
• Pad code text
■ In standard mode, the paper feed amount set by the paper feed setting command does not affect printing of the
symbol. The printing position returns to the left side of the printable area after printing the symbol.
■ In page mode, the printer stores the symbol data in the print buffer without executing actual printing.
■ The quiet zone is not included in the printing data. Be sure to include the adequate quiet zone for executing of this
command.
Differences:
Example:
None
■ Input:
0x1d 0x28 0x6b 0x03 0x00 0x32 0x41 0x34
0x1d 0x28 0x6b 0x1b 0x00 0x32 0x50 0x30
0x5a 0x51 0x31 0x31 0x30 0x5f 0x5a 0x65 0x62 0x72
0x61 0x20 0x54 0x65 0x63 0x68 0x6e 0x6f 0x6c 0x6f
0x67 0x69 0x65 0x73
0x1d 0x28 0x6b 0x03 0x00 0x32 0x51 0x30
0x0a