Product specifications

SPP-R210 Command Manual

Rev. 1.00 BIXOLON

- 163 -

BS L L

Function:

Select black mark mode

Code:

ASCII

Hex

Decimal

Range:

None

Default:

None

Description:

■ This commands selects black mark mode

• The label mode must be set for printing on the black mark paper.

Remarks:

■ This command is enabled in receipt mode.

■ This command can activate the black mark mode even if the receipt mode is predefined by the memory

switch(Msw8-5). However, since the mode specified by the memory switch(Msw8-5) is set to the default mode, the

receipt mode becomes effective after the printer reset or power cycling is executed.

■ The memory switch(Msw8-5) should be enabled to maintain the black mark mode after the printer reset or power

cycling.

■ Once the printer has entered the black mark mode, it is necessary to perform the procedures as follows for the

proper operation:

• Executing the automatic calibration to figure out the location of each black mark paper.

• Readjusting the printing position by pressing paper Feed button or opening/closing the printer cover.

Differences:

None