Product specifications

SPP-R210 Command Manual
Rev. 1.00 BIXOLON
- 119 -
Remarks:
■ This command is adapted to print image data.
■ pL, pH specifies the number of bytes following pH using (pL + pH x 256).
■ Since frequent writing operation could cause the damage to the NV memory, it is recommended to write only when
being required.
■ While storing data by this command, the printer is in BUSY state where receiving of data is not available. Therefore, it
is not recommended to send data during this process.
■ The real time commands and ASB operations are not allowed during NV memory operation process.
Differences:
None