User`s manual

Rev. 1.07
- 32 -
SLP-T40xx/D40xx
7. Appendix
7-1 Specifications
Item Description
Printing Method Thermal Transfer / Direct Thermal Printing
Dot Density
SLP-T400 / D400: 203 dpi (8 dot/mm)
SLP-T403 / D403: 300 dpi (11.8 dot/mm)
Printing Width Max 104 mm
Printer
Printing Speed
SLP-T400 / D400: 152 mm/sec (6ips)
SLP-T403 / D403: 100 mm/sec (4ips)
Width 25 ~ 116 mm
Roll Max 130mm
Paper
Core 25.4~38.1mm (1~1.5”)
Length / Width Max 300m / 33 ~ 110mm
Type Wax, Wax/Resin, Resin ,Outside type
Ribbon
Core 0.5” / 1”
Input Voltage AC 100~240V
Frequency 50/60 Hz
AC
Adapter
Output Voltage DC 24V
Temperature
0 ~ 45 ℃ (Operating)
-20 ~ 60 ℃ (Storage)
Usage
Conditions
Humidity
(except for paper)
10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
※ Note
- Printing speed can vary depending on the data transmission speed and combination of
control commands.
- This equipment is indooruse and all the communication hiring are limited to inside of
the building.
- The switch is the disconnecting device. Turn off switch from any hazard.