User Manual

32
[Figure 3.3.4.1] TELNET Network menu
 [0] Network Mode : Select a network mode( Infra Network(0) / Adhoc(1)).
 [1] Adhoc Channel : Configure Adhoc Channel(1~14) to Connection.
 [2] SSID : It should be configured the SSID same as AP's SSID to be access.
 [3] Inactivity Time : It means a time limit keeping connection that without data
communication between client and server.
 [4] IP Assignment Method : Select IP Assignment megthod( DHCP(0)/Manual
Alloccation(1) ).
 [5] IP Address : If you selected Manual Alloccation(1), configure IP Address.
 [6] Subnet Mask : If you selected Manual Alloccation(1), configure Subnet Mask.
 [7] Gateway : If you selected Manual Alloccation(1), configure Gateway.
 [$] Back: Go to the previous menu.
 [#] Main Menu : Go to the main menu.
3.3.5 Authentication
: Configure CMAX Module Security. It should be configured the Security same as AP's
Security to be access.
 Select “[4]Authentication” to “configuration main menu”.
[Figure 3.3.5.1] TELNET Security main menu
 [0] Authentication : You configure a security method.. Reference [Table 3.3.5.1]
 [1] Cyrptograph : Configure an encryption method according to security methods.
 [2] Key : Configure a key of WEP or PSK.
 [3] EAP : Configure an EAP Mode according to WPA/WPA2