User's Manual

Music Streaming Operations

To use the helmet communicator with your music devices you must connect

them wirelessly through Bluetooth pairing. This step is only required for Bluetooth

music streaming devices.

Pairing

• To connect the helmet communicator to a Bluetooth music device, hold the Up

and Down buttons for 2 seconds. This puts the helmet communicator into pairing

mode. The status indicator will blink blue and red alternately.

• Next, put the Bluetooth music device into pairing mode. Both the helmet

communicator and the music device should automatically pair together.

After pairing the helmet communicator to a music device, you may use the helmet

communicator to wirelessly listen to music stored on the device.

In order to use the helmet communicator to remotely control the music, the music

device must have Bluetooth Audio/Video Remote Control capability, AVRCP profile.

Play & Stop

• The Play and Stop command is a toggle function. To play music, press the

Answer button 2 times. Pressing the Answer button 2 times while music is playing