User's Manual

Installation

Install Metal Mounting Bracket

1. Identify a position on the helmet to adhere the Metal

Mounting Bracket.

Install Main Unit

1. Identify a position on the helmet to adhere the Metal Mounting Bracket.

2. Peel off the double sided tape protective film.

3. Carefully place the Metal Mounting Bracket onto the position identified in step 1.

(You may only do this step once)

4. Apply slight pressure onto the metal mounting bracket to ensure that the metal mounting

bracket is firmly secured.

5. Make sure that permanent metal mounting clip is installed with the 2 side holes at the top

and the metal prong pointing down.

2. Slide main unit onto the clip bracket. You should hear a ‘click’ sound when fully inserted.

3. Fully insert the speaker USB connector.