User's Manual

LEAR

• When the battery level is low, the status indicator would flash

red twice every 2 seconds while emitting a warning beep

every minute.

Charging the Unit

• To charge the helmet communicator, connect the provided

charging cable to the speaker/ charging socket. Upon

charging, if the unit is on, system would automatically initiate

power down.

Volume Control

• The volume control of the helmet communicator can be

controlled using the Up and Down buttons. Pressing the Up or

Down button one time would increase or reduce the volume

respectively. The volume control for each mode is

independent of each other.

Automatic Pairing

• The helmet communicator has the ability to connect to the

last paired device automatically for two features – music and

mobile phone.

• Automatic pairing of the helmet communicator with music

dongles is dependent on the music dongle.

Automatic Profile Switch

• The helmet communicator supports multiple profiles

concurrently, but at any point of time only one profile is

active. The automatic profile switch determines which profile

should be active at any point of time starting from the highest

priority: (1) Mobile Phone functions (2) Intercom functions

and (3) Music functions.

• The helmet communicator can be paired to more than 1

device, but it is recommended to keep it at the most to 2

General Operations