Manualshelf

User's Manual

ManualsBrandsBitwave Private ManualsElectronicsHBC100 Helmet Communicator
11121314151617181920
UC
LEAR
TM
13
Your UC
LEAR
TM
HBC100 helmet communicator is now setup
and ready to go!
The operations described here are applicable to all modes
of operations.
Power On
• Hold the Answer button for 2 seconds to power on the helmet
communicator. The status indicator will blink blue and a
power up tone can be heard.
Power Off
• To switch off the helmet communicator, press and hold the
Answer button for 5 seconds. The status indicator will blink
red 5 times followed by a long beep before fully shutting
down.
Power Save Mode (Auto Power Off)
• If intercom had been in use before, and all other Bluetooth
devices have been disconnected, the system will auto
shutdown in 1 hour. Else system would auto power off after
10 minutes of not connecting to any other device.
Low battery
Up button
Speaker /
charging socket
Down button
Status
indicator
Answer
button
General Operations