Quick Start Guide

Bittium Tough Mobile 2 Quick Start Guide6
Insert your primary Nano SIM card onto the SIM card slot
as shown above. If you have a secondary Nano SIM card,
insert it onto the Dual Mode slot. In case you are not using
two SIM cards you can insert your Micro SDHC card onto
the Dual Mode slot. After the SIM and SD cards are insert-
ed, push the SIM tray back.
See the figure below if you are inserting two SIM cards.
NOTE: In order to maintain water and dust resistance,
keep the rubber seal around the SIM tray clean of any
dirt.
Prior to using the device the battery should be fully
charged using the charger and the USB cable provided
in the sales package.
Press the power key to power up
the device.