User manual

USER MANUAL
Terminology
The terms below are widely used throughout this manual, and we explain them here to make sure their
exact meanings are understood in order to make this manual clearer.
Analog Controls of which values can vary from 0 to 127 (as opposed to digital controls)
Arppeggiator Feature allowing the generation of MIDI notes depending on user parameters input
Assignable Controls of the Bitstream 3X which can generate MIDI events
Assignation MIDI configuration of a Bitstream 3X control
Control
change CC
Standard MIDI event recognized by any MIDI device or software
Control Any knob, slider, button
Digital Two states of control (on/off), as opposed to analog control
Download Action to send a new assign configuration to the Bitstream 3X
Driver Program that allows to a computer to recognize the Bitstream 3X
Firmware Embedded software of the Bitstream 3X, also called OS
Footswitch Digital input allowing the connection of an external pedal
Global Bitstream 3X parameter which doesn’t correspond to an assignation
Group Set of configured controls of the Bitstream 3X
Hook Controls behaviour that avoids ‘jumps’ of their values when changing from one group
to another
Jump Control behaviour that reflects the physical value of the control
LCD Display of the Bitstream 3X
LFO Low Frequency Oscillator
MMC MIDI Machine Control : transport function MIDI events, allowing synchronization
Note On/Off MIDI Message controlling musical notes
NVM « Non volatile memory » : internal memory of the Bitstream 3X, allowing you to save
your configuration even without it being powered
Push Digital control behaviour of the Bitstream 3X (as opposed to ‘toggle’)
Scene Physical position of all the Bitstream 3X controls. Can be saved at any time.
Slider Vertical potentiometer, 8 of them are present on the Bitstream 3X
Sync-24 Synchronisation protocol of vintage (pre-MIDI) instruments like TB-303…
Sysex System Exclusive : device/manufacturer specific MIDI event
Toggle Behaviour of a digital control as opposed to ‘push’
Upload Action to read from the Bitstream 3X a configuration assigned
User Parameter defined by the user
Rev 1.2 - Page 8