User manual
USER MANUAL
Electrical Signals Generated
The different signals generated by the SYNC-24 are grouped into three: Run, Continue and Clock. The
following diagram illustrates the principles of real time MIDI conversion to SYNC-24.
Menus associated to the SYNC-24 output
Navigation of the menus
Principles of navigation
Access to the menus is through the button EDIT; two types of menus are available:
- Menus of configuration (press once)
- Assign Menus (press twice)
Menus of configuration allow the configuration of the parameters of the Bitstream 3X based on the
environment, the functions used or not used, etc.
The Assign Menus allow the user to assign MIDI events and parameters to the Bitstream 3X, the
usage of this menu is described in the dedicated chapter.
To navigate these menus, there are 4 simple and classic functions:
- OK Validation of the current value, or access to a sub-menu
- CANCEL Cancel current function, return from a sub-menu
- UP Increase current value, choose the next menu of the same level
- DOWN Decrease the current value or choose the preceding menu on the same level
Rev 1.2 - Page 54
Clock
Clock
Message MIDI
Sync24 Clock
Start
Stop
Continue
Stop
Message MIDI
Sync24 Run
Sync24 Continue
Clock
Clock
Clock
Sync-24 State On/Off
Source Midi In
USB In
+2-7
"&+2-7
2-7
Sync Internal
External
2-7
2-75