User manual
USER MANUAL
Menus associated with the arppeggiator (continued)
Motion Sampler
Goal
As the name indicates, the motion sampler allows the saving and restitution of the movements of the
controls of the Bitstream 3X, in real time.
The user can automate certain motions of the sliders and other controls, in order to have two hands
free to use other controls or functions of the Bitstream 3X.
The motion sampler is part of the currently selected group during the restitution phase, for example, a
slider recorded while group 1 is selected, and restituted while group 2 is the new group selected, will
generate the MIDI events of the slider assigned to group 2 (the group selected during the restitution).
The motion sampler can optionally be configured by the menus in Loop mode, which will allow the
looping of the tracks during the restitution, no matter what the length of the previously saved track.
The characteristics of the motion sampler are as follows:
- Possible sampling of all controls of the Bitstream 3X (sliders, ribbon, joystick, buttons...)
- 8 sample tracks – 1 control per track
- Possible restitution of the 8 tracks simultaneously
- Controllable length of ½, 1, 1 ½, 2, 2 ½, 3, 3 ½, 4 measure(s) independently for each track
- Synchronization of external or internal MIDI
- Looping of the tracks for continuity
- Graphical display of the value of each track
- Sampler frequency : Each three MIDI clock ticks for an increased fluidity
- Saving of each track in a non volatile memory
Rev 1.2 - Page 49
Midi config Realtime config
30 - 250
USB In
MIDI In
External src
Internal tempo
Internal state On/Off
4&=6
GK
+
*
D5,
Automations Arppeggiator Arp outputs +$
MIDI Out 1
On/Off
+-
MIDI Out 2
On/Off
"&$G-
USB Out
On/Off
Arp Midi src +)
MIDI In
USB In
"&)
Arp sync
Internal
External 5