User manual

USER MANUAL
Saving the scenes
Pressing and holding the « Save/Send » button for longer than 3 seconds will save the coordinates of
all the buttons and sliders for the scene number selected.
$%$11&'( 2)
)
Automations
Knobs and buttons associated with the automations
Three knobs, three buttons and four LED (Light Emitting Diode) are dedicated to automations. The
printed words on the face of the Bitstream 3X allows the user to find the different functions controlled
by each button and slider.
The Selection Button allows the user to choose the control of one of the three automations, each
automation has a dedicated LED Selection, and so the user can quickly see which automation is
currently selected.
Simply pressing the Selection button allows the user to change from one automation to another.
The General Automation LED will be lit when at least one automation is activated, it will be off if none
of the three automations are activated.
The On/Off Button Turns on and off the automation selected.
The three dedicated potentiometers for the automations still function in hook mode, and no « value
Rev 1.2 - Page 38
3 dedicated knobs Automation
light (LED)
Button for
parameter #1
Stop/Go
Button
Selection
Button
Selection
Lights (LED)