User manual
USER MANUAL
Digital Behaviour
This parameter defines the behaviour of the different digital controls
Available on the Bitstream 3X. The available choices are:
Push
Toggle
These different modes are described in this manual – see the dedicated chapters
$%&'(
-%89
The parameters dedicated to Standard mode
The following parameters are dedicated to the Standard mode of the Bitstream 3X.
Number of the CC or Note
The Bitstream 3X in standard mode can generate control change
or Note messages depending on the configuration chosen.
The user can modify the number of the CC or Note to be generated,
choosing from among the 128 possibilities defined by the MIDI standard
$%&'(
-%89
The parameters dedicated to User mode
The following parameters are dedicated to the user mode of the Bitstream 3X. This means that if a
parameter needs to be reconfigured to be compatible with the software or controlling synth, user mode
is required.
Min & Max values
These two distinct parameters allow the reduction of the range of
analog and digital controls on the Bitstream 3X.
The MIDI standard authorizes the values from 0 to 127 (7 bits) for each control, but the user can
reduce these values with a parameter for Min & Max associated to each control, for each of the 21
groups.
$%.)2
)
-%1$-H5
Rev 1.2 - Page 30
Standard √
User √
Digital behav.
Standard -
User √
Min & Max
Standard √
User -
CC/Nt number