User manual
USER MANUAL
-%"&'(
)
Examples of usage :
- Logarithmic variation to control a volume
- Inversion of sent MIDI values
- Generation of random MIDI sequences
MIDI and USB Inputs
The Bitstream 3X has one MIDI input on the standard connector, as well as one USB input.
Each of these inputs plays the same role and could be routed towards:
- MIDI out 1 on connecter MIDI
- MIDI out 1 on USB
- SYNC-24 out
- Internal functions of the Bitstream 3X (LFO, Arppeggiator, …)
Besides the function of MIDI controller, the Bitstream 3X can be used as a:
- USB – MIDI converter
- MIDI – SYNC-24 converter
- USB – SYNC-24 converter
The routing of the different MIDI inputs is done across the menus of the Bitstream 3X for each of these
functions.
Each of these MIDI inputs is not exclusive, except for the functions that necessitate a real-time MIDI
clock.
Also the 2 inputs MIDI and MIDI USB can be re-routed at the same time towards a MIDI out 1. The
possibilities of the Bitstream 3X extend so that it can be integrated into any MIDI environment.
The MIDI inputs also feature MIDI filters allowing the elimination of real-time messages often unused
which overloads the MIDI bus. The filters are also accessible by the menus; see the complete routing
schematic below.
$%2+)
5&'(
24,GGG6
& '( ) 5 4# D
6
D2+D5
* + ?@ ) *
5!2-7*+"&
-%++
Rev 1.2 - Page 23