Installation Instructions

The radar window functions to show the movements of objects detected by the radar on a
randomly set lane. At this point, the radar window can be modified using a property window
to more effectively check the movements of objects. For example, a radar window, by
default, has four lanes, and if the radar is located on a two-lane road, it should be able to
change the drawing so that only two lanes are drawn. Setting up the visual effects of these
radar windows is the function of the Setup Lane tab. The Setup Track also has the ability to
set the visual effects of the tracked vehicle in the radar window.
<Setup Lane>
① Display Range
The Display Range, which controls the length and width of the lane in the radar window.
② Starting Point
The starting point can change the coordinates of the lane in the radar window.
③ The number of Lanes
The number of Lanes is an item that controls the number of lanes drawn in the radar
window.
④ Lane Axis
Lane Axis is the section to modify the direction of the radar if it does not have same
direction to that of the lanes.
⑤ Display Speed
Display Speed limits the speed so that objects that are not within the speed range are not