Installation Instructions

3.3 Equipment Management
Before measuring data with radar, make sure that the radar is in a measurable condition and
that the radar is well connected to the PC.
1. Add Device
If the radar and the PC are well connected, the radar can be added to the equipment list so
that data can be received. The device can be added through ‘Add Equipement’ Function
(found in Recording tab of the menu bar or the Add Device icon on the bottom of the menu
bar).
The preceding activities will result in an Add/Modify Device window. In addition, GPS, front-
cameras and radar can be connected in this window.
2. Device Settings
In order to use the radar efficiently, the following properties window should be used. The
three tabs in the Properties window allow you to set up the visual parts of the radar and the
visual window. Setup line and Setup Track establishes the way radar window is displayed.