Installation Instructions

3 Data Recording using Radar Analyzer
Radar Analyzer stores the speed, acceleration, ID and distance of the vehicle measured by the
radar in a record file within the Radar Analyzer file. This stored data is called Logging Data and
logging data can be replayed using the Radar Analyzer.
3.1 Creating and Managing files
Let me explain how to create and manage a file for storing data measured by radar.
1. Creating a file
(a) Press ‘New’ on the top-line file tab of the top menu bar
(b) Press ‘Icon’ at the further left of the bottom of the menu bar
Both methods can open a new record window and create new files.
Once the file is opened and is saved, the file will be saved as BTS/Rec/Record Pat.
The data can be stored by using ‘record start’ function (note. detailed manual will be
provided for the record start function). It is to note that the saved data cannot be adjusted
with the current s/w version that the stoppage of the recording must be handled cautiously.
3.2 Recording and Checking
Since the radar and the PC are well connected and the data measurement setup is complete,
we will measure and record the data using the radar and check it out.
1. Recording
To record data measured by the radar, ‘Start Recording’ must be selected (where it is found
in sub-list of the Record on the top menu, or Start Recording Icon at the bottom line). Once
the function is activated, the data obtained from the radar and images from the front-
camera will be displayed.