User Manual

Handy Terminal User Guide 33
Power LED turns to Blue.
Caution
nn
n：
：：
：
Please don’t remove the Battery pack too long from Handy Terminal
after you have already full-charged the Battery pack and backup
battery pack and start to use the Handy Terminal. Otherwise the data
stored inside SDRAM memory will be lost. Please also keep in mind
power the Handy Terminal off if you want to change the main Battery
pack.
3.2. Starting the Handy Terminal
Press the Power key to turn on/off the Handy Terminal. If the Handy Terminal
does not power on, please perform a cold boot. See 2.5 Resetting the Handy
Terminal on page 25
Caution
nn
n：
：：
：
When a battery is fully inserted in Handy Terminal for the first
time, upon the Handy Terminal’s first power up, the device boots
and powers on automatically.
When the Handy Terminal is
powered on for the first time, it
initializes its system.
A splash screen appears for a
short period of time followed by
the Wince.NET 5.0 window.
3.3. Power (and Backlight) on / off
Press the Power/Backlight key briefly ( ). If the Handy Terminal does not
power on, please perform the cold reset.
As the Handy Terminal initializes its File system, the Terminal splash screen