User Manual

Handy Terminal User Guide 26
2.5.2. Cold Reset
1. You can use Cold Reset to initiate device if WINCE.NET OS lock up or
Warm Reset still can’t work
2. To perform Cold Reset, please press < > & < > & < > key
simultaneously until Cold reset start.
3. Device will initiate boot up after Cold Reset.
Caution：
：：
：
Please press the <ESC> & <Power> key first. Try warm
reset before you initiate Cold Reset. All applications will be
Closed and working RAM and all files will be cleared if you
initiate the Cold Reset. It’s better usually to back up your
files to Flash ROM, Flash Card.
2.6. Saving to Flash
The DiskOnChip folder let the application or a data file can be stored into the
Flash Memory. To save an application or data to the Flash Memory, from your
current application, select File 

 Save As 

 navigate to the DiskOnChip location
and save it.
You can use backup manager form start  program to backup all system and
save it to the DiskOnChip fold after you install your application program and do
the all setting complete.
Note
ee
e：
：：
：
The DiskOnChip storage memory persists all reset (warm/cold
reboot) conditions and software/firmware updates.
We strongly recommend installing all applications, applets,
programs, and important data files to the DiskOnChip Flash
location.
Caution
nn
n：
：：
：
If an application or a data file is only installed or saved in RAM, a
hard reset will result in the loss of that application or data file.
The size of the DiskOnChip folder will vary, depending on the size of system
firmware。
 Inside the DiskOnChip directory, tap File 

 Properties
ss
s。