User's Manual

2.4.7.2: Alpha plane keys by “Apha” + main Function:
1. The
key enables you to toggle between the numeric and alpha modes.
Numeric mode is when you type numbers with number keys. Alpha mode is when you
type letters with the number keys.
2. When you press key, it appears “ Alpha ＂icon at the Task bar to indicate
Alpha mode is enabled. It means Alpha mode is disabled if there isn＇t “Alpha
“ icon at Task bar. The keypad stays in the alpha mode until you press key
again. For a example to type “ cap1“ word, press
< wait 0.5 seconds >
3. If you want to type a lowercase “ c “, press (The
key three times, the key is needed if it＇s the first alpha character
keying in. ). If a letter that is on the same key as the last letter entered, wait two
seconds after you pressed the last key, then you can enter the correct series of
keystrokes to create the next letter.
4. While you are in the Alpha mode and you press
key to initial the CAPS mode,
you will render a CAPS LOCK until you press key again. Once you are in
CAPS mode, you stay in CAPS until it is pressed again.
5. It appears “CAPS＂ icon at TASK bar during CAPS mode.
Table 2-5(A) Alpha + Numeric keys define
To
enter
Press the Keys To
enter
Press the Keys
$
#
&
Λ
:
\
@ (
) ,
P2-19