User's Manual

3.2.20 Power
Table 3-19 Power
ICON ITEM & FUNCTION
l “Battery” Tab : (Figure 3-18-1)
ü Provide change level indicators for Main battery and Backup
battery.
ü To exit Battery control panel, press “OK” from the command
bar, or press <Enter> key on keypad.
l “ Schemes” Tab: (Figure 3-18-2)
ü The Scheme Tab allows you to determine the time to switch
state to Suspend mode when using either Battery Power or AC
Power.
ü Select Battery Power or AC Power as the power scheme from
the pull-down list.( Figure 3-18-2)
ü Select the time to suspend mode from the pull-down list.
( Figure 3-18-3)
l “Device Status” Tab: ( Figure 3-18-4)
Power
Provide power level of device – The power level ranges from
“ High(D0)” which means the device is at the highest power level to
“Off(D4)” which means the device is at the lowest power level.
Figure 3-18-1 Figure 3-18-2
P3-53