User's Manual

Table 2-1 Description of PDA General View
“Red” color Reading barcode
1 Scanner LED Indicator
“Green” color successful reading
“Blue” color Blinking for alarm
“Red” color Charging battery
2 Alarm/Charge LED
Indicator
“Green” color Battery charged full
3 LCM/ Touch Panel Do specific action through touch panel by stylus
4 Left Scan key
Right Scan key
Scan key
Start scanning the barcode by pressing any one of
these three scan keys
5 Power/Backlight key
1. Puts the terminal into and wakes the terminal from
suspend mode if this key button isn＇t pressed more
than two seconds.
2. Turns on/off the LED backlight of LCM if this key
button is pressed more than two seconds.
6 Light key Turn the front illumination LED on/off
7 F1 key~ F4 key The four application keys, hot keys of application
program defined by end user.
8 Navigation key Navigation keys for left, right, up and down
directions
9 Alpha-Numeric keys Numeric keys, Change to Alpha keys after pressing
Alpha key.
10 Alpha key Toggle Alpha-mode for Alpha-Numeric keys
11 Fn key
This key is used in combination with other keys to type
special characters and perform system functions.
12 Enter key
This key confirms data entry
13 Ear phone Jack
Connector
A connector to plug a earphone set with microphone
14 DC power /USB /Serial
/Synchronization port
A connector to support DC power, USB Host/Client
and serial functions
15 CF Cover Protect CF connector and SD connector from dust and
water
16 Light A white LED flashlight
17 Barcode window A window for scanning of barcode reader
P2-4