User's Manual

Page 66
BitaTek Co., Ltd. Copyright protected. All rights reserved.
NO. 115 Wugong 3rd Rd., Tel [phone]
Wugu Dist., New Taipei City 248, Taiwan (R.O.C.) Fax[phone]
DFS
material information infrastructure device operating in the
5.25Ghz ~5.35GHz and 5.47GHz~5.725GHz Bands
incorporating dynamic frequency selection
Part 15B
Radio Frequency Devices
OET65 (SAR)
operations or devices comply with limits for human
exposure to radiofrequency (RF) fields adopted by the
Federal Communications
BQB Certificate:
BQB
complies with all the Bluetooth SIG requirements
WiFi Alliance:
WiFi Logo
WiFi Alliance approval
Note: SAR requirements specific to portable mobiles
This requires the Specific Absorption Rate (SAR) of portable Frey M1 applications to be
evaluated and approved for compliance with national and/or international regulations.
Since the SAR value varies significantly with the individual product design manufacturers
are advised to submit their product for approval if designed for portable use. For European
markets the relevant directives are mentioned below. It is the responsibility of the
manufacturer of the final product to verify whether or not further standards,
recommendations or directives are in force outside these areas.
6.1. Safety Precautions
The following safety precautions must be observed during all phases of the operation,
usage, service or repair of any cellular terminal or mobile incorporating Frey M1
Manufacturers of the cellular terminal are advised to convey the following safety information
to users and operating personnel and to incorporate these guidelines into all manuals
supplied with the product. Failure to comply with these precautions violates safety
standards of design, manufacture and intended use of the product.