Operation Manual

www.bissell.com
7
2a.
3.
2.
3.
2b.
4.
Power
Recline
Carpet cleaning
1. Plug into proper outlet.
2. Adjust the retractable handle by turning
the lock counterclockwise and lifting
the handle up. Turn the lock clockwise
to secure.
3. With foot, press the red power lever,
located on the back of the machine.
NOTE: The handle must be fully
extended for the spray trigger
to function properly.
4. With foot, press the recline lever
located next to power lever.
5. Cleaning Strokes. While pressing the
spray trigger, make one slow forward
wet pass and another one back.
Caution: Do not overwet.
6. Release the spray trigger and make one
slow forward and backward pass over
the same area.
7. Repeat steps 5 and 6 until solution
being pulled up appears clean.
8. Empty the collection tank when dirty
water reaches the full line, or when
the solution tank is empty.
Empty the collection tank
1. With foot, press the red power lever to
turn unit off and then unplug power cord
from outlet.
2. Remove the collection tank from base of unit.
2a. Release collection tank latches
(on each side) by pulling up from the
bottom of latch and then out.
2b. Carefully remove tank by lifting
up on the tank handle.
3. Carry collection tank to a toilet or
sink. To empty, pour out contents
using opening at back of tank.
4. Rinse collection tank thoroughly and
replace on unit.
5. Refill solution tank and continue cleaning.
Operations