81N7 HYDROCLEAN COMPLETE™ Downloaded from www.Manualslib.
A-1 11 3 6 9 5 2 1 12 13 4 14 7 15 8 10 20 17 16 18 19 21 A-2 38 22 23 37 36 27 25 26 29 28 24 30 34 31 32 A-3 A-4 2 39 40 41 42 43 35 33 44 45 46 47 48 49 50 51 52 53 54 55 56 www.bissell.com Downloaded from www.Manualslib.
B 1 2 4 3 C-1 4 C-2 4 5 2 1 3 5 6 7 8 9 www.bissell.com Downloaded from www.Manualslib.
EN C-3 5 1 C-4 5 1a h bv g kvh gh bj j gh dd kll df kn hn hl j f Ads j j jh bb cv ghhj gc C-5 1 7 10 D-1 2 1 5 6 D-2 4 5 4 3 1. www.bissell.com Downloaded from www.Manualslib.com manuals search engine 4 3 7a 7b 2.
Thanks for buying a BISSELL water filtration cleaner We’re glad you purchased a BISSELL water filtration cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL water filtration cleaner is well made, and we back it with a limited two year guarantee. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
Important Safety Instructions » Do not immerse in water or liquid. » If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water; do not attempt to operate it and return it to a service center. » Liquid or steam must not be directed towards equipment containing electrical components. » Do not pull or carry by cable, use cable as a handle, Always connect to a properly earthed close door on cable, or pull cable around sharp edges ELECTRICAL SOCKET. or corners.
A Product View D o not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
Wet cleaning C-2 Getting ready IMPORTANT: Never run in Wet Clean mode when the solution formula tank is empty or missing. 1. Plan activities to give your carpets time to dry. 7. Refer to section D for machine care instructions. 2. Thoroughly dry vacuum area to be cleaned. C-4 Upholstery Cleaning 3. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit. 4. Open Quick Release hose door, turn mode selector to “WET CLEAN”, then close hose door.
IMPORTANT: Be sure to use BISSELL Hard Floor Solution when cleaning sealed hard floor surfaces. 4. Place solution tank back in the machine. 5. Attach Microfiber mop pad to quick dry hard floor tool by attaching ends to Velcro strips on top of tool. 6. Attach quick dry hard floor tool to end of the wand. 7. Plug into a proper electrical socket and push heater, power and wet clean buttons on. 7. Rinse collection tank, mode selector and water filtration tower.
Consumer Guarantee This Guarantee only applies outside of the USA and Canada. It is provided by BISSELL International Trading Company BV (“BISSELL”). This Guarantee is provided by BISSELL. It gives you specific rights. It is offered as an additional benefit to your rights under law. You also have other rights under law which may vary from country to country. You can find out about your legal rights and remedies by contacting your local consumer advice service.
