Operation Manual

w w w . b i s s e l l . c o m
Assembly
6
This user’s guide has been designed
to help you get the maximum
satisfaction from your BISSELL deep
cleaner. You’ll find assembly and
operating instructions, safety
precautions, as well as maintenance
and troubleshooting instructions.
Please read this user’s guide
thoroughly before assembling your
deep cleaner.
Your deep cleaner comes in four easy to
assemble components:
• Handle assembly
• Upper hose rack
• Lower body assembly
• Lower hose rack
Four Phillips head screws are
included, 2 long and 2 short. They can
be found taped to the handle assembly.
The only tool you will need to assemble
your cleaner is a Phillips head
screwdriver.
1. Slide handle assembly onto lower body
and secure with two long screws.
2. Attach upper hose rack to back of handle
assembly by pushing into open slots and
sliding down until it snaps into place.
3. Attach lower hose rack by sliding in place
on lower body assembly and securing
with 2 short screws.
4. Attach Tough Stain tool to end of hose.
5. Wrap flex hose around hose rack and
secure it into notched out holder as
shown.
6. Keep flex hose locked in place with hose
secure latch.
Hose Secure Latch
WARNING:
Do not plug in your cleaner
until you have completely
assembled it per the
instructions and are familiar
with all instructions and
operating procedures.
Tip: Deep cleaning carpeting
regularly can reduce dust and
allergens in your home.
1.
2.
3.
4.
6.
5.