USER'S GUIDE 57G7 SERIES 220-240V 2 Thank You 3 Safety Instructions 4-5 6 7-14 15 16-17 Product View Assembly Operations Maintenance and Care Troubleshooting 18 Replacement Parts 18 Accessories and Formulas 19 Warranty 20 Consumer Services
Thanks for buying a BISSELL Healthy Home ProHeat™ We’re glad you purchased a BISSELL Healthy Home ProHeat deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL Healthy Home ProHeat deep cleaner is well made, and we back it with a limited two year warranty.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: ■ Remove plug from electrical outlet before Read all instructions before using your deep cleaner.
Product view Ergonomically Designed Handle Handle Assembly Heat Indicator Light/Built-in Hot Water Heater Heater Switch: Turn heat on or off as needed Lower Body Assembly Integrated Carry Handle ReadyTools™ Dial Belt Access Door Removable Nozzle DirtLifter™ PowerBrush Edge Sweep™ Brushes Optional Accessories: These items are available for purchase. To order replacement parts, additional tools or formulas, please refer to page 18-19.
Product view Spray Trigger Cord Clip Quick Release™ Cord Wrap Tough Stain Tool Made from 75% Post Consumer Recycled Materials Hose Secure Latch Power Cord Ready-to-Use Hose WARNING: To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the deep cleaner. NonBISSELL cleaning formulas may harm the machine and void the warranty.
Assembly This user’s guide has been designed to help you get the maximum satisfaction from your BISSELL deep cleaner. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this user’s guide thoroughly before assembling your deep cleaner.
Operations Special features Your BISSELL deep cleaner is a home cleaning system that uses a combination of heat, BISSELL advanced cleaning formula, brush agitation and suction to safely clean carpets. Heater Switch Built-In-Heater BISSELL ProHeat models all feature a patented built-in heater which will heat the hand hot tap water you put in it to safely optimize cleaning effectiveness. The heater will never allow the temperature to exceed 82°C degrees.
Operations Special features continued Scotchgard™ Protector Carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. To help restore this important protection, only BISSELL offers cleaning formulas with Scotchgard protector. This offers extra protection against dirt and tough stains to keep your carpets looking good longer.
Operations Before you clean 1. Plan activities to give your carpet time to dry. 2. Move furniture to another area if cleaning an entire room (optional). 3. Vacuum area with a dry vacuum cleaner before deep cleaning. 4. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit. EXIT 12 5 9 10 11 6 7 2 4 3 1 T STAR E HER 3' 4' 5.
Operations Fill the 2-in-1 water tank 1. 2. 3. 4. 5. 6. 1. Remove the tank from the base of the machine by lifting the tank carry handle. 2. Carry like a bucket to the sink. Rotate the handle forward to unlatch the lid. Remove lid, turn over and locate built in measuring cup. 3. Fill formula to the indicated fill line on the built in measuring cup and pour into mouth of the bladder. 4. Fill the bladder with clean hand hot tap water. *Do not boil or microwave water as it can destroy the bladder. 5.
Operations Carpet cleaning 1. Plug the deep cleaner into a proper outlet. Set ReadyTools dial to the Floor Cleaning setting. Turn the power on by pressing the red power switch on the back of the unit with your foot. Turn heater switch (located on side of unit) to the on position. Allow one minute for the built-in heater to warm up before cleaning. NOTE: The Heathly Home ProHeat will be fully warmed and will provide optimal performance after one minute of continuous heated cleaning. 2.
Operations Empty the 2-in-1 water tank/clean removable nozzle 1. Turn power switch off. Remove the 2-in-1 water tank from the base using the tank carry handle. Carry the tank like a bucket to a utility sink or outside where you will dispose of the collection water. Remove the top of the tank by rotating the handle forward to unlatch lid and lifting lid off tank. 2. 1. 2. Empty collection water from bottom of tank. 3. After each use, remove and rinse the lint screen located on the tank lid. 4.
Operations ReadyTools™ continued 5. Vacuum thoroughly to pick up loose debris and pet hair. Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds and tufts. 6. To begin cleaning with attachments, follow the instructions on page 10 for filling the 2-in-1 water tank. 7. 7. Set the ReadyTools dial to the TOOLS setting. This will allow spray and suction from the hose. 8. Attach the cleaning tool of your choice to the end of the hose. 9.
Operations Hard Floor Cleaning Your deep cleaner may have included a hard floor tool and Hard Floor Solutions. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors. Caution: Do not use on unsealed hardwood floors. 1. Thoroughly vacuum or sweep floor to pick up any debris. NOTE: Prior to filling with formula and water be sure all carpet cleaning formula is thoroughly rinsed from the 2-in-1 water tank. 2.
Maintenance and care Machine care For best results, a few simple steps can assure your machine is well maintained after cleaning is complete. 1. Turn power switch off. Unplug the machine and wrap the power cord. 2 . After emptying the 2-in-1 water tank, rinse it with running hand hot tap water, taking care to clean underneath and around the heavy duty bladder. Clean out red lint screen. Removable nozzle may be rinsed if necessary. 3. Replace the 2-in-1 water tank on the machine. 4.
Troubleshooting WARNING: To reduce the risk of electric shock, or injury, unplug from the outlet before servcing Heat indicator light does not illuminate Possible Causes Remedies 1. 2. 1. Turn on the heater switch located on side of unit. 2. Both switches must be on to activate the heat indicator light. The heater switch is not turned on. The machine power switch is not turned on. Reduced spray OR no spray Possible cause 1. Remedies Bladder may be empty. 1.
Troubleshooting DirtLifter PowerBrush does not turn Possible cause 1. The brush belt or pump belt is off or broken. Remedies 1. Refer to Remedy 4 on page 16 to check if brush belt or pump belt is broken. Cleaner not picking up solution Possible cause 1. ReadyTools dial may be on the wrong setting for the cleaning job. Remedies 1. Set ReadyTools dial to either FLOOR CLEANING or TOOLS. 2. Poor tool position. (Hand held attachments only). 2. Adjust angle; apply more downward pressure. 3.
Replacement parts Item Part No. 1 2 3 4 5 6 1 203-0104 203-0102 203-0124 215-0628 015-0621 203-0105 2 Part Name Tank Assembly Complete Tank Base Removable Nozzle Replacement Pump Belt (with instructions) Replacement Brush Belt (with instructions) Lint Screen 3 4 5 6 Accessories and formulas Item Part No.
Warranty - BISSELL Healthy Home ProHeat This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by telephone, or regular post as described below, or contact your local in country distributor.
BISSELL consumer services If your BISSELL product should require service: Call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. If you have questions about your warranty or need replacement parts please contact the numbers below.
