Earn BISSELL Rewards! Register your product today! See details on page 2 back page USER'S GUIDE 15D1 SERIES 2 Thank You 2 Product registration 3 Safety instructions 4 Product view 4-5 Assembly 5 Operations 6 Maintenance and care 7 Troubleshooting 7 Replacement parts 8 Warranty
Thanks for buying a BISSELL EasySweep™ We’re glad you purchased a BISSELL EasySweep. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL EasySweep is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using your EasySweep™ sweeper. When using an electrical appliance, basic precautions should be observed, including the following: WARNING: To reduce the risk of fire, electric shock, or injury: ■ Do not use or charge EasySweep outdoors. ■ Do not allow EasySweep to be used as ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ a toy. Close attention is necessary when used by or near children. Do not immerse or use on wet surfaces.
Product view Non-Slip Handle Grip Charging Port Metal Extension Handle Assembly Handle Assembly Swivel Connector Charging Indicator Light Power Switch DC Adapter Assembly The EasySweep requires very little assembly. Remove it from the box and check it against the illustration to familiarize yourself with the components listed. The exploded view diagram with part names will also be helpful if you should need to order a part at a later time. 1.
Assembly Charging the battery 1. When completely charged, the EasySweep provides up to 45 minutes of cleaning time. 2. When charging for the first time, allow to charge uninterrupted for at least 16 hours. Thereafter, charge at least 16 hours to fully renew the EasySweep battery. The charging indicator light will illuminate when properly connected and will not turn off when fully charged.
Maintenance and care Emptying dirt cup The Dirt Cup should be emptied after each use. 1. Make sure the EasySweep is in the “OFF” position. 2. Hold the base of the unit over a waste can to empty. 3. Press the dirt container release button and empty the contents into the waste can. Note: The dirt container opens from the bottom of the EasySweep. 4. Push the dirt container door gently back into place. 5. Clean exterior surfaces with a soft cloth dampened with water only.
Troubleshooting No power Possible causes 1. Remedies EasySweep is not charged thoroughly 1. Make sure EasySweep has been properly plugged into an outlet for the recommended amount of time. See “Charging the Battery” on page 5 EasySweep operating but not picking up mess Possible causes Remedies 1. The dirt container may be full 1. Empty out the dirt container (see Maintenance and Care on page 6) 2. Debris may be lodged in the EasySweep or may be too heavy for the sweeper to pick up 2.
Warranty- BISSELL EasySweep This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc.
