User Manual

Storing Your Robot

Status and Error Notiﬁcations

Status Button Light State Light Ring Sound

Power ON

Pulse Once > Blink > On Pulse Once Activation Sound

Cleaning

Blink > Fade In > On Pulse Once > Fade In > 30 seconds > Fade Out Activation Sound

Charging

Breathing Pulse Once > Breathing for 30 seconds > Off 1 Beep

Pairing Mode

Blink Off 1 Beep

Paired

On Solid for 5 Seconds > Fade Out 3 Beeps

Low Battery

Blinking White Off 2 Beeps

Error Button Light State Sound Remedies

Robot is Trapped, Lifted, or

Cli Sensors are Dirty

Flashing Red 1 Beep Place robot on floor away from objects and

resume cleaning. If error persists, use a dry cloth

to clean the 3 cliff sensors on the bottom of the

robot.

Front Caster Wheel Sensor is Blocked

Flashing Red 3 Beeps Remove Front Caster Wheel assembly, clear

debris from assembly housing, reinstall wheel.

Left or Right Wheel is Stuck

Flashing Red > Solid Red 1 Beep Turn robot OFF and remove hair and debris from

wheels.

Edge Cleaning Brushes are Stuck

Flashing Red > Solid Red 2 Beeps Turn OFF the robot and remove hair and debris

from Edge Cleaning Brushes.

Brush Roll is Stuck

Flashing Red > Solid Red 3 Beeps Turn OFF the robot and remove hair and debris

from Brush Roll.

Bumper is Stuck or Robot is Trapped

Flashing White 2 Beeps Turn OFF the robot and tap the Bumper several

times to release any debris that may have

accumulated.

Error Notifications

Status Notifications

Store your robotic vacuum cleaner safely indoors where it is unlikely to be damaged.

Part Number 1625231 07/20