Manual

ig
WARNING:
ReducedSprayORNoSpray
Possible cause
1. Clean/solutiontankmaybe empty
2. Clean/solutiontankmaynot be seatedproperly
3. Pumpmayhavelostprime
No spraythroughthe hose
Possiblecause
1. Pumpmaynot be primed
TLRPowerRollerDoesNotTurn
Possible cause
1. Thebrushbeltisoff or broken
Machinenotpicking upsolution
Possible cause
1. Collectiontank maynot beseatedproperly
2. ReadyToolsdial maybe onTOOLS
3. Floatmayhaveshutoff
4. Collectiontank maybefull
Remedies :i¸¸ : :: /:
1. Turnpowerswitch OFF;Refilltankwith
cleanhot tapwater andformula
2. Turnpowerswitch OFF;removetank
and reseat
Turnpowerswitch OFF( 0 ); after1 minute
turnON( I ) and depressspraytrigger
Besure thereis cleaningformulain the
clean/solutiontank,it willmakethe
machineprimefaster
Remedies
1. TurnReadyToolsdialto FLOORCLEANING
and depresstriggerfor afew a seconds
until youseesuctioncomingup the nozzle
TurnReadyToolsdial backto TOOLS
Remedies
1. Referto page 11,steps 1-5 for instructions
on how to accessthe belt
2. Lookat the belt and check for breakage
or misalignmenton the cogs. IFthere is
no evidence, replaceall partsfollowing
steps 8-11.
3. In the eventyour belt is broken,a
replacementbelt may beordered at
www.bissell.com or by calling BISSELL
consumer servicesat 800-237-7691.
Refertothe partslist on page14. Complete
installation instructionswill comewith
the replacementbelt
Remedies
1. Turnpowerswitch OFF;reseattank
2. TurnReadyToolsdialto FLOORCLEANING
3. Turnpowerswitch OFFand emptytank if
necessary.If tankis not full,wait
30 secondsandturn powerswitchON
4. Turnpowerswitch OFFand emptytank
12 www.bissell.com
800,237.7691
ug120-4035 7350 708En.indd 12 8/21/08 4:22:50 PM