PowerSteamer® Powerbrush PowerLifter® Powerbrush USER’S GUIDE 1370 SERIES 1622 SERIES 3 Safety Instructions 4 Product View 5 Assembly/Special Features 6-8 Operation 8-9 Maintenance and Care 9-10 Troubleshooting 10 Consumer Services 11 Replacement Parts 11 Accessories 12 Warranty
Thank you for buying a BISSELL deep cleaner We’re glad you purchased a BISSELL deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. By purchasing this product you are helping BISSELL with our commitment to reducing our impact on the environment through an expanding range of sustainable design efforts. Your deep cleaner is well made, and we back it with a limited one-year warranty.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using your PowerSteamer® PowerLifter® ■ Turn off all controls before unplugging. ■ Be extra careful when cleaning stairs. ■ Close attention is necessary when used by or near children. WARNING: To reduce the risk SAVE THESE INSTRUCTIONS. ■ Do not immerse. of fire, electric shock, or injury: ■ Use only on surfaces moistened by cleaning process.
Product view Spray Trigger Cord Clip Strain Reliever Handle™ Quick Release™ Cord Wrap Handle Assembly Power Cord Power Switch Upper Body Assembly 2-in-1 Tank™ with built in measuring cup Lower Body Assembly Large, Easy-To-Maneuver Wheels Easy Carry Handle Handle Release Belt Access Door WARNING: To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner.
W arning: Do not plug in your cleaner Assembly Your deep cleaner comes in three easy to assemble components: • Handle assembly • Upper body assembly • Lower body assembly Three Phillips head screws are also included and can be found taped to handle assembly. The only tool you will need to assemble your cleaner is a Phillips head screwdriver. 1. Slide upper body assembly onto lower body and secure with two screws. 2.
ATTENTION: Some Berber carpets have a Operation Before you clean 1. Plan activities to give your carpet time to dry. 2. Move furniture to another area if cleaning an entire room (optional). 3. Vacuum area with a dry vacuum cleaner before deep cleaning. 4. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit. 5. Pretreating (optional) tendency to fuzz with wear.
Operation Carpet cleaning strokes 1. Plug the deep cleaner into a proper outlet and turn the power switch ON ( I ). The switch is located on the back of the unit. 2. With your foot, press the handle release lever on the back of the lower body of unit. 3. While pressing the spray trigger, make one slow forward wet pass and another back. Let the BISSELL 2X advanced deep cleaning formula and DirtLifter PowerBrush do the work for you. Caution: Do not over wet. 4.
Operation WARNING: Hard Floor Cleaning To reduce the risk of fire and electric shock- when cleaning a hard floor, the BISSELL hard floor tool 203-5641 must be used and it must only be used with BISSELL Hard Floor Solutions or BISSELL 2X Hard Floor Solutions cleaning fluid intended for use with this appliance. Your deep cleaner may have included a hard floor tool and Hard Floor Solutions Formula. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors.
Maintenance and care Machine care continued 3. Replace the 2-in-1 water tank on the machine. 4. Any loose hair or debris can be pulled from the brush roll if desired and thrown away. 5. Wipe the machine’s exterior with a soft cloth. 6. After carpet is dry, vacuum again to remove hair and fuzz. W ARNING: To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing. Machine storage Put the unit away in a closet or basement for the next use.
Troubleshooting DirtLifter PowerBrush Does Not Turn Possible cause 1. The brush belt or pump belt is off or broken. Cleaner Not Picking Up Solution Possible cause Remedies 1. Refer to troubleshoting on page 9 to check if brush belt or pump belt is broken. Remedies 1. Removable nozzle may not be properly attached. 1. Make sure nozzle is on correctly by slightly raising front of machine to line up slots on the base of the machine with the hooks on nozzle.
Replacement parts Item Part No. 1 2 3 4 5 6 1 203-0104 203-0102 203-0124 215-0628 015-0621 203-0105 2 Part Name Tank Assembly Complete Tank Base Removable Nozzle Replacement Pump Belt (with instructions) Replacement Brush Belt (with instructions) Lint Screen 3 4 5 6 Accessories Item Part No. 1 2 3 4 5 6 7 8 9 Part Name 203-5641 Hard Floor Tool, with trial size bottle of BISSELL 2X Hard Floor Solutions formula 62E5 2X Fiber Cleansing Formula with Scotchgard™ Protection 24 oz.
Warranty - BISSELL PowerSteamer/PowerLifter This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc.
