User`s guide

www.bissell.com
Assembly
6
Your CleanView
®
ProHeat
®
comes in
four easy to assemble components:
•Handleassembly
•Upperhoserack
•Lowerbodyassembly
•Lowerhoserack
FourPhillipsheadscrewsareincluded,
2longand2short.Theycanbefound
tapedtothehandleassembly.
Theonlytoolyouwillneedtoassemble
yourcleanerisaPhillipshead
screwdriver.
1. Slide handle assembly onto lower body
and secure with two long screws.
2. Attach upper hose rack to back of handle
assembly by pushing into open slots and
sliding down until it snaps into place.
3. Attach lower hose rack by sliding in place
on lower body assembly and securing
with 2 short screws.
4. Attach Tough Stain tool to end of hose.
5. Wrap flex hose around hose rack and
secure it into notched out holder as
shown.
6. Keep flex hose locked in place with hose
secure latch.
Hose Secure Latch
WARNING:
Do not plug in your cleaner
until you have completely
assembled it per the
instructions and are familiar
with all instructions and
operating procedures.
Tip: Deep cleaning carpeting
regularly can reduce dust and
allergens in your home.
1.
2.
3.
4.
6.
5.