User`s guide
www.bissell.com
Operations
14
ReadyTools™ continued
CleaningwithDeepReach™Tool
(select models only)
1. Set tool on soiled surfaces and press the spray
trigger to spray solution onto the soiled area
to be cleaned.
2. Slowly move the tool back and forth over the
soiled surface, keeping the tool in contact with
the carpet.
Release spray trigger and move tool slow-
ly over the soiled area to suction up water
and dirt.
4. Continue to clean the area, working in small
sections, until no more dirt can be removed.
Hard Floor Cleaning
Your CleanView
®
ProHeat
®
mayhave
includedahardfloortooland2XHard
FloorSolutions.Thehardfloortoolpro-
videseffectivecleaningforlinoleum,
vinyl,andtilefloors.
Caution: Do not use on unsealed
hardwoodfloors.
1. Thoroughly vacuum or sweep floor to pick
up any debris.
NOTE:Priortofillingwithformula
and water be sure all carpet cleaning
formulaisthoroughlyrinsedfromthe
2-in-1watertank.
2. Fill BISSELL Hard Floor Solutions to the
indicated fill line in the built in measuring
cup and pour into mouth of bladder.
3. Fill the bladder with clean hand hot tap
water and set aside.
4. Attach the hard floor tool to the bottom of
the machine by hooking it into the nozzle
and swinging it down until it clicks into
place.
5. Be sure the ReadyTools dial is set to
FLOOR CLEANING.
6. Plug into an outlet and turn the power on.
7. Plan your cleaning route to leave an exit
path. Be sure to allow adequate time for
floors to dry.
4.
1.
3.