Meijer.
Meijer.com Thanks for buying a BISSELL CleanView ® vacuum We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your carpet cleaner is well made, and we back it with a limited warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
Meijer.com IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using upright VACUUM Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance. WARNING: To reduce the risk of fire, electric shock, or injury: ■ Do not modify the polarized plug to fit a non-polarized outlet or extension cord.
Meijer.
Meijer.com Assembly The only tool you’ll need to assemble your vacuum cleaner is a Phillips head screwdriver. 2. Attach handle to vacuum 1. Locate the vacuum handle and remove the screw packet taped to the handle. The screw packet contains two screws of equal length. 2. Stand the vacuum upright and slide the base of the handle firmly into the opening at the top of the vacuum body. 3. Check to be sure the handle is fitted to the vacuum body.
Meijer.com Operations Power switch The Power switch is located on the left side of the vacuum. Push the rocker switch "ON" (I) to vacuum, and "OFF" (O) when cleaning is complete. Handle position Press the handle release pedal with your foot to place your CleanView vacuum into one of three cleaning positions. 1. Upright– For storage and above floor caution: cleaning with tools.
Meijer.com Operations Special tools Your BISSELL CleanView vacuum is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile above floor vacuum cleaner when you select one of the special tools. 1. Raise handle to upright position. 2. Grasp the hose wand and separate from the hose wand base. NOTICE: The floor brush will continue to rotate while you use your vacuum for above floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the powerfoot tilt forward. 3.
Meijer.com Operations Power cord storage When you have finished using your BISSELL CleanView vacuum, return it to the upright position and store the power cord. 1. Turn vacuum cleaner off. 2. Unplug power cord by grasping the polarized plug (NOT the cord) and disconnect from outlet. 3. Wrap power cord around cord wraps located on the back of the vacuum. 4. Clip molded plug to power cord to secure. NOTICE: While vacuuming, certain carpets and low humidity conditions may generate small static discharges.
Meijer.com Maintenance and care Empty Dirt Tank The dirt tank needs to be emptied when the dirt reaches the “Full” line on the side of the tank. 1. Unplug cleaner from electrical outlet. 2. Remove the Easy Empty dirt tank from the vacuum base by pushing the tank release button. 3. Hold the dirt tank over a garbage container. Press the bottom lid release button on the back of the dirt tank to empty dirt. 4. Mount the Easy Empty dirt tank back on the vacuum base.
Meijer.com Maintenance and care Replacing the post-motor filter Use only a genuine BISSELL replacement post-motor filter in your BISSELL CleanView vacuum. 1. Unplug the cleaner from electrical outlet. 2. The post-motor filter assists in the filtration process to return clean air to the room. Replace the post-motor filter every three to six months. To access the post-motor filter, remove the filter tray located below the Easy Empty dirt tank.
Meijer.com Maintenance and care Replace drive belt Use only a genuine BISSELL style 9 replacement belt (#203-1093) in your BISSELL CleanView vacuum. 1. Unplug cleaner from electrical outlet. 2. With rotating floor brush removed from vacuum cleaner (steps 1-4 of Check rotating floor brush and drive belt), grasp old drive belt and remove from motor pulley. Discard old drive belt. 3. Place new drive belt over motor pulley and stretch other end over rotating floor brush in the space between the bristles. 4.
Meijer.com Maintenance and care Clearing a clog 3. Low suction or poor pickup may be due to a clog in the vacuum cleaner. If you notice a change in the sound of the motor or a reduction in the spinning action, check for clogs. 1. Unplug cleaner from electrical outlet. 2. Remove Easy Empty dirt tank from vacuum base and empty dirt and debris. 3. Remove inner cyclone from Easy Empty dirt tank (see page 9) and check for debris build-up or clogs in the upper tank. 4. 4. Check the suction inlet for a clog.
Meijer.com Troubleshooting – CleanView® vacuum Vacuum cleaner won’t turn on Possible causes Remedies 1. Power cord not plugged in 1. Check electrical plug 2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker Vacuum cleaner won’t pick up dirt Possible causes Remedies 1. Incorrect height adjustment 1. Adjust powerfoot to correct height setting 2. Hose not attached to suction opening 2. Grasp the hose wand and firmly push into the hose wand base 3. Crack or hole in hose 3.
Meijer.com Accessories – CleanView® vacuum These items are available for purchase as accessories for your BISSELL CleanView vacuum. To purchase call 1-800-237-7691 or visit www.bissell.com. Item Part No. Part Name 2 3 1 203-1429 TurboBrush Tool 2 203-1056 Crevice Tool 3 203-2666 Extension Wand 4 203-1527 Dusting Brush *Not all parts are included with every model 1 4 Replacement Parts – CleanView® vacuum Item 1 2 3 4 1 Part No.
Meijer.com Warranty – BISSELL CleanView® vacuum This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, or regular mail as described below.
Meijer.com Don't forget to register your product! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: BISSELL Rewards Points Automatically earn points for discounts and free shipping on future purchases. Faster Service Supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Reminders and Alerts We’ll contact you with any important product maintenance reminders and alerts.
