Manual

CARTON CONTENTS

A. Vacuum Base

B. Handle

C. Screws (2)

D. Upper Cord Wrap

E. Hose Wand Clip

F. TurboBrush tool

G. Dusting Brush

H. Hose

I. Crevice Tool _

J. Extension Wand

_Note: Crevice tool is located inside Extension Wand

Assembly

1, Slide handle onto machine base

2, Screw 2 screws into existing holes with Phillips-head

screwdriver

3, Insert extension wand clip into back of vacuum base

and twist clockwise

4, Line up tabs on the cuff of the hose with the notches

on back of vacuum, twist hose clockwise to lock into place

5, Slide other end of hose into hose wand base and place

hose over upper hose wrap

6, Slide tools into place

*Productimagesmayvary