Manual

Tank
_nk needs to be emptied when the dirt
"Full" line on the side of the tank.
cleaner from electrical outlet.
the Easy Empty dirt tank from the
by pushing the tank release button.
'the dirt tank over a garbage container.
bottom lid release button on the back
dirt tank to empty dirt.
]nt the Easy Empty dirt tank back on the
base.
tank may be washed in warm
with a mild detergent, Make sure it is
! before replacing.
_1the pre-motor filter and inner cyclone
only genuine BISSELL replacement filters
in your BISSELL CleanView vacuum.
1. Unplug the cleaner from electrical outlet.
2. a. Remove the Easy Empty dirt tank and
locate the pre-motor filter as described on
the previous page.
b. Remove the foam filter from the filter
tray. The filter tray is fixed in-place, but
may be removed for cleaning by unscrewing
the tray. The foam filter and tray may be
hand washed in warm water with a mild
detergent, if desired. Rinse well, then air
dry thoroughly before replacing the filter.
Make sure all components are completely
dry before replacing.
3. The inner cyclone may also be removed for 3,
cleaning. With the bottom of Easy Empty dirt
tank open, reach up into the dirt cup and grasp
the cyclone. Twist the cyclone clockwise to
unlock and pull straight down to remove. The
inner cyclone and dirt cup may be wiped clean
with a damp cloth. Make sure all parts are dry
before replacing.
AWARNING
withoutallfiltersinplace.
2b,
NOTICE
Donotplacethedirttankorotherproductcomponents
inthedishwasher.Handwashonly.