PET HAIR ERASER® LIFT-OFF® ENGINEERED FOR HOMES WITH PETS QUICK START/USER GUIDE 2087 Series More of a video person? Look for this icon and go online for an instructional how-to video at www.BISSELL.
Quick Start Guide REFER TO PAGE 5 FOR COMPLETE USER GUIDE INSTRUCTIONS, PRODUCT VIEW, AND IMPORTANT SAFETY NOTICES. Assembly 1 Slide handle into vacuum base. Attach with the screw that is taped to the handle. 2 4 3 Push handle end into base of vacuum on opposite side. Attach hose by lining the tabs on the cuff with the notches on the back of the vacuum. Twist clockwise to lock hose into place. INSTALL OPTIONAL FEBREZE® FILTER Press Tank Release Button and pull container away from vacuum.
Built by Pet Owners Cyclonic Pet Hair Spooling System™ BISSELL is the only vacuum brand with a Cyclonic Pet-Hair Spooling System™ for a Hands Free Empty. A patented hair management system that spools and traps hair to keep it out of your filters and off your hands. Just press the release button and watch the ball of pet hair drop right out. You no longer have to reach up and pull the ‘yuck’ out. Tangle Free Brush Roll Pick up pet hair without having to cut it off your brush roll.
for Pet Owners Specialized Pet Tools Customize your cleaning with interchangeable tools stored right on board. Soft dusting bristles for delicate surfaces and rubber fingers that can be engaged to remove embedded pet hair on stairs and furniture. Uncover hidden dirt and pet hair with the LED Lighted Crevice Tool that allows you to reach in tight places. Power through pet hair on stairs and furniture with the Pet TurboEraser® Tool. www.BISSELL.
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM. Always connect to a polarized outlet (one slot is wider than the other). Unplug from outlet when not in use and before conducting maintenance. When using an electrical appliance, basic precautions should be observed, including the following: WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: » Do not leave vacuum cleaner when it is plugged in. Unplug from outlet when not in use and before servicing.
Thanks for buying a BISSELL vacuum! We love to clean and we’re excited to share one of our new innovative products with you. We want to make sure your vacuum works as well in five years as it does today, so this guide has tips on using (page 7-11), maintaining (pages 12-15), and if there is a problem, troubleshooting (page 16).
Product View Handle Pet TurboEraser® Tool* Lift-Off® Canister Release Button Cord Clip Dirt Container Release Button Stretch Hose Brush Roll On/Off Switch Power Switch Carry Handle Pre-Motor Filter Cover Pre-Motor Filter Dirt Container Post-Motor Filter Cover Adjustable Floor Type Setting Telescoping Extension Wand with Handle (removable, if desired) Quick Release® Cord Wrap 2-in-1 Pet Brush Hose Wand Base (under dirt tank) LED Lighted Crevice Tool Brush Roll *NOTE: Pet TurboEraser® Tool does no
Operations WARNING Do not plug in your vacuum until you are familiar with all instructions and operating procedures. 2 1 Brushroll ON/OFF Switch Power ON/OFF Switch Turn vacuum on by pressing Power Switch on (I - ON and O - OFF). Press Brush Roll switch to run the PowerBrush for carpet cleaning (brush roll is on when light on switch is illuminated). See page 15 to maintain the brush roll. Step gently on base and pull back on handle to recline.
Above Floor Cleaning 1 Clean stairs or furniture easily with the removable canister. Push the Lift-Off button to remove and attach desired tool. 3 If desired, the telescoping extension wand can be removed from the hose. To do so, grab the telescoping wand handle and pull up while holding the end of the hose. 5 2 For the most reach, extend the telescoping extension wand by twisting to the right to unlock. Then slide the telescoping extension wand to your desired length. 4 Attach desired tool.
LED Lighted Crevice Tool 2 1 Pull tabs out of battery door area before use to activate. Connect to wand or hose and the LED Light will automatically come on. To replace LED battery, unscrew the small screw with a Phillips head screw driver. Pull cover off to reveal two batteries (CR1632 3V). Slide and pull out each battery and replace with new. Be sure the “+” sign on battery is facing out. Dispose of used battery promptly. Keep away from children. Do not disassemble and do not dispose of in fire.
Remove/Empty Dirt Container WARNING To reduce the risk of electrical shock, turn power switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. 2 1 The dirt container is full. Time to empty! Press the Release Button and grab the handle to pull the dirt container away from vacuum. 4 3 Hold the dirt container over a trash bin and press the Empty Button. Once emptied, snap bottom back into place.
Clean/Replace Pre-Motor Filters WARNING To reduce the risk of electrical shock, turn power switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. WARNING Do not operate vacuum with damp or wet filters. Allow components to dry before reassembling the dirt container. 2 1 Press the dirt container Release Button and pull away from vacuum. Twist tank cover to the unlock position then pull up on handle.
Clean/Replace Post-Motor Filter WARNING To reduce the risk of electrical shock, turn power switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. WARNING Do not operate vacuum with damp or wet filters. Allow components to dry before reassembling the dirt container. 1 2 Press the dirt container Release Button and pull container away from vacuum. Remove post-motor filter cover by pulling up on the tab.
Clean Inner Cyclone Separator 1 Twist tank cover to the unlock position then pull up on handle to access bulk separator. 2 3 Pull up to remove the bulk separator from dirt container. Tap separator against inside of trash bin and rinse under warm water, if necessary. Be sure to let it completely dry before placing back in dirt container. When replacing, be sure that separator aligns with the upper tank to ensure fit.
Replace Brush and Belt Unplug and turn vacuum over. Unscrew 10 Phillips head screws to remove bottom cover. 3 2 1 Pull roller straight out and slide belt off motor gear. Replace roller and/or belt. 1. Inspect brush roll by placing it on its end and spin. The brush roll should spin freely, multiple times by one flick. If it doesn’t, replace brush roll. 2. Inspect belt, replace if it appears damaged. 4 1. Place belt back on brush roll. 2. Pinch belt around brush roll & hook back around the motor gear.
Troubleshooting the risk of electric shock, turn power switch off WARNING Toandreduce disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. Problem Possible causes Remedies Brush roll switch is turned off. Make sure Brush roll switch is on. Vacuum is locked in upright position. Recline vacuum and switch on the Brush roll. Vacuuming on Premium Soft Carpet. Turn the Floor Type Setting towards high carpet.
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, or regular mail as described below.
Register your product today! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: BISSELL Rewards Points Automatically earn points for discounts and free shipping on future purchases. Faster Service Supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Reminders and Alerts We’ll contact you with any important product maintenance reminders and alerts.
