TM _______________ USER GUIDE 1844 SERIES More of a video person? Look for this icon and go online for an instructional how-to video at BISSELL.
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR PORTABLE DOG BATH SYSTEM. When using an electrical appliance, basic precautions should be observed, including the following: WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: » Use only warm tap water. Do not use heated water. » Connect to a properly grounded outlet only. See grounding instructions. Do not modify the 3-prong grounded plug. » Do not leave appliance when it is plugged in.
Thanks for buying a BISSELL BarkBath™! We love pets, so we’re excited to share one of our newest innovative pet products with you. We want to make sure your BarkBath™ dog bathing system works as well in years to come as it does today, so this guide includes tips on usage, maintenance and, if there is a problem, basic troubleshooting.
Before You Get Started Helpful Tips to Get Ready: • Always use a BISSELL no-rinse dog shampoo. • If your dog has long hair, brush your pet’s hair before bathing. • When selecting an area to bathe your dog, choose a place where your pet feels comfortable and safe. Usual choices include the kitchen, utility room, garage or family room. • Lay down a separate blanket or towel where you will be bathing your dog. • When placing the cleaner on the floor, be sure to set it on the microfiber mat.
Getting to Know Your Cleaner 18 1 17 16 2 15 3 14 6 4 5 9 11 10 7 8 12 13 1. 2. 3. 4. 5. 6. 7. 8. 9. Carry Handle Power On/Off Switch Dirty Water Tank Flex Hose Clip Flex Hose Storage Bracket Quick Release™ Cord Wrap Power Cord Clean Water Tank Flex Hose Connector Release 10. Shampoo Tool Connector 11. Rinse/Shampoo Switch 12. Shampoo Reservoir 13. Spray Nozzle 14. Nozzle Spray Trigger 15. Mesh Plate 16. Nozzle Height Selection 17. Removable Face Plate 18.
Assembly WARNING Do not plug in your Portable Dog Bath System until you are familiar with all the safety and operating instructions. Assembling your Portable Dog Bath System is a simple process. The only tool you will need is a Phillips screwdriver. 2 1 click Slide the back plate of the flex hose clip into the opening on the front of the unit. You will hear a “click” when it is locked in place. 4 3 Insert screw and tighten with a screwdriver.
Preparing Your Cleaner WARNING To reduce the risk of injury to your pet, do not boil or microwave water. Use only warm tap water. 2 1 Remove the clean water tank by lifting it straight up and then away from the unit. Flip the tank so the black cap is on top and unscrew. Pull up to remove cap assembly from tank. 4 3 To ensure your pet has a nice bathing experience, use warmto-the-touch tap water to the fill line on your clean water tank. Replace the cap before returning the tank to the machine.
Attaching the Bathing Tool NOTICE: Dish soap, traditional dog or human shampoos and/or conditioners should not be used as they may be too thick and may damage the machine. Use only BISSELL No-Rinse Dog Shampoo in your Portable Dog Bath System. Use of shampoos or soaps which contain lemon or pine oil may damage this appliance and void the warranty. These products may react with the plastic materials used in your cleaner, causing cracking or pitting.
Bathing Your Dog WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT IMMERSE APPLIANCE IN WATER OR PLACE IN AREA WHERE SPLASHING MAY OCCUR. NOTICE: Always use genuine BISSELL No-Rinse Dog Shampoo. Other shampoos may harm the machine and will void the warranty. Recommended areas for bathing your dog: • • • • Kitchen Utility Room Garage Family Room 2 1 Place the base unit on the microfiber mat on the floor of the area where you are going to bathe your dog.
Bathing Your Dog (continued) 5 6 Set the Rinse/Shampoo switch to the desired setting. For Shampoo, the reservoir will dispense a mixture of shampoo and water; for Rinse, it will dispense just water. Prime the system by pointing the nozzle at the microfiber mat and pressing and holding the spray trigger for 15-20 seconds to allow solution to dispense. NOTE: The Dog Bathing Tool is always extracting dirty water. The trigger dispenses the shampoo and/or water.
Emptying the Dirty Water Tank WARNING To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 1 2 Turn power switch to the OFF (O) position and unplug power cord from outlet. Lift up the dirty water tank lever and pull up to remove the tank from the unit. Carry the tank upright to avoid spilling before emptying.
Cleaning Your BarkBath™ After Use WARNING To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 2 1 Remove and rinse out the dirty water tank following instructions in the “Emptying the Dirty Water Tank” section. Turn power switch to the OFF (O) position and unplug power cord from outlet. 4 3 Press release button and disconnect flex hose from the dog bathing tool by pulling straight out.
Storing Your BarkBath™ WARNING To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. NOTICE: To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to internal components may result. 2 1 Wipe all surfaces with a soft cloth and machine wash microfiber towel and mat, making sure all items are clean and dry.
Troubleshooting WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by e-mail or telephone as described below.
Register your product today! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: BISSELL Rewards Points Product Support Reminders and Alerts Automatically earn points for discounts and free shipping on future purchases. Faster Service We’ll contact you with any important product maintenance reminders and alerts. Supplying your information now saves you time should you need to contact us with questions regarding your product.
