User Manual

2
10. When removing a loaded pallet, ALWAYS raise the load until the bottom of the pallet clears the top of the EZ
Loader before backing up. ALWAYS stay well clear of the load while it is being removed from the EZ Loader.
SEVERE PERSONAL INJURY and PROPERTY DAMAGE could result.
11. ALWAYS ensure all safety warning labels are in place and legible. If not, remove the EZ Loader from service
and replace the required labels. Refer to Figure 1 for label descriptions and locations.
12. Before servicing any component in the EZ Loader’s pneumatic system, ALWAYS open the purge valve and
discharge all air pressure. SEVERE PERSONAL INJURY could result.
13. DO NOT infl ate the air spring when removed from the EZ Loader. Pressurizing the unrestricted air spring may
cause assembly to burst. SEVERE PERSONAL INJURY and PROPERTY DAMAGE could result.
CAUTION
1. ALWAYS use clean dry air to pressurize the system.
2. If the EZ Loader is equipped with the optional semi-live portability, ALWAYS remove the load before engaging
the portability wheels.
SAFETY WARNING LABEL LOCATIONS
Figure 1 Safety Warning Label Locations