User Manual

DECLARATION OF CONFORMITY
Name of manufacturer: Bishamon Industries Corporation
Address of manufacturer: 5651 E. Francis Street
Ontario, California 91761, USA
Name of Manufacturer’s
authorized representative:
(Print name)
The Technical Construction File is maintained at: IMS
ZI-Rue Saint Gilles
28800 BONNEVAL
I hereby declare that the following machinery complies with all the Essential Health and Safety
Requirements of the Machinery Directive 2006/42/EC as amended.
Machinery description: EZ Loader (Pneumatic Load Positioner)
Serial no.: 1105***to date
Transposed Harmonized European Standards used:
EN 12100: 2010 Safety of Machinery – General principles for design – Risk assessment
and risk reduction
EN 349: 1993+A1: 2008 Safety of Machinery - Minimum gaps to avoid crushing of parts of the
human body
EN 13857: 2008 Safety of Machinery - Safety distances to prevent danger zones being
reached by the upper and lower limbs
EN 983:1996+A1:2008 Safety of Machinery - Safety requirements for fluid power systems and
components – Pneumatics
EN 14121-1:2007 Safety of Machinery – Risk assessment – Part 1: Principles
Additional standards used:
ANSI MH29.1-2008 Safety Requirements for Industrial Scissors Lifts
Name of responsible person: Robert M. Stone
Position of responsible person: Vice President of Operations
DECLARATION:
I declare that as the authorized responsible person, the above information in relation to the supply /
manufacture of this product is in conformity with the stated standards and other related documents
following the provisions of the EC Machinery Directive.
Signature of responsible person:
date: 09 / 08 /2011
Robert M. Stone day/mth/year
Signature of authorized representative: date: / /
(Print name) day/mth/year