User Manual

15
Chart 2 EZ Loader Performance
Notes:
1. The above chart is for reference only to illustrate the capacity variability of the EZ Loader. Other initial
pressures may be better suited for a specifi c loading/unloading application.
2. There are multiple EZ Loader settings for most pallet weights. For example, consider a total pallet load of 1650
lbs. Three (3) of the possible settings are:
25 psi with the EZ Adjust knob in position three,
35 psi with the EZ Adjust knob in position two,
50 psi with the EZ Adjust knob in position one.
Each setting will provide a slightly different load response and the ideal setting will depend of the load height,
number of layers in the load and the operator height.
3. The above chart assumes a typical load height with the last layer of load being placed on the pallet with the EZ
Loader fully compressed.
4. The EZ Loader is completely variable in capacity and any initial pressure setting between 10 psi and 60 psi
may be used.