User Manual

12
EZ Adjust Knob Operation
1. The EZ Adjust knob provides for quick and easy capacity changes without the need to add or remove air. The
amount of capacity change for each knob position is relative to the initial system pressure. However, each
knob position changes the collapsed capacity by approximately 40%.
2. The position of the EZ Adjust knob can be changed at any time during the loading or unloading cycle. For
example, if the EZ Adjust knob is in the Medium Weight Position and the platform is settling to quickly with the
fi rst layer of load, simply turn the knob to the Heavy Weight Position. Likewise, if the response is too stiff after
the fi rst layer of load, turn the knob to the Light Weight Position.
3. Adjusting the EZ Adjust knob during a loading or unloading cycle will cause an imbalance in the system
air pressure in the various reservoirs. If after several mid-cycle adjustments the performance becomes
undesirable, simply equalize the system pressure by turning the EZ Adjust knob to the Light Weight Position
when the EZ Loader is in the fully raised position. Wait a few seconds for the pressure to equalize and return
the knob to the desired position.
HANDLING INSTRUCTIONS
Certain applications may require the EZ Loader to be relocated frequently. Handling the EZ Loader can be easily
accomplished as follows:
1. Remove all load from the platform and allow the EZ Loader to extend to its fully raised position.
2. Using a fork lift, position the forks under the platform structure, as detailed in Figure 9.
3. Slowly lift the EZ Loader until the base frame clears the fl oor. The EZ Loader can now be moved to the next
location.
ROUTINE MAINTENANCE
The EZ Loader is designed to provide years of trouble free service and requires very little maintenance. However, a
routine inspection and maintenance program will prevent costly replacement of parts and/or downtime.