Technical data

English
Pyro start
plus+
Bischoff & Bischoff GmbH • 27.08.2012 17
• The arm supports for the side parts (desk/long) are fit-
ted as desk (short) on delivery.
• You can change the arm supports to the long setting in
just a few steps. First, remove the fixing screws on the
underside. You can then push the arm supports for-
wards and fix them again once they are in the required
position (Fig. 14).
• For the height adjustment of the armrests, first remove
the fixing screws (Fig. 14). The height can be adjusted
in four stages by using adapters. In the lowest setting
(Fig. 15), all the adapters are fixed under the support.
The more adapters you attach above the support, the
higher the armrest is. In the highest setting, all the
adapters are above the support (Fig. 16).
Fig. 14
Fig. 15
Fig. 16