Technical data

Hazard warning lights:
Use this button to switch on the hazard warning lights in an emer-
gency when the scooter is unfit to drive. All four indicators will then
blink and signal other traffic participants that your scooter is unfit
to drive.
Indicators (left/right):
Use this button to activate the left or right-hand indicator of your
scooter in order to signal other traffic participants that you wish to
change the travel direction to the left/right. By pressing the button
again, you will deactivate the indicator.
Mode/Set:
With the help of the MODE and SET buttons, you can make settings
on the LCD screen.
Parking light:
Pressing this button switches the parking light on. In this way, you
can be easily seen even in darkness or at dawn and dusk.
Driving light:
Use this button to switch on the lights on your scooter after dusk or
when passing through dark routes such as a tunnel. You will then
be seen better by other traffic participants.
Speed setting:
With this button you can set the driving stage, i.e. the maximum
speed available. There are two speed settings: fast and slow.
The current speed setting is shown on the right of the LCD display.
Horn:
The horn allows you to attract attention in difficult situations.
LED status display:
The LED status display can be used to see whether particular func-
tions such as indicators or driving light are activated.
14 15
12
13
14
15
The LEDs in the status display have the following meanings (left to right): left indicator, hazard
warning lights, service LED, parking light, driving light and right indicator. Illumination of the
light indicates whether the respective function is active.
19
16
17
18
Ethon
EN