Technical data

5. Technical data
Measurements and weights
Max. load (kg): 160
Seat width (cm): 51
Seat depth (cm): 48
Seat height from the
foot plate (cm): 450 mm, adjustable to
470, 490, 510 mm
Backrest height (cm): 75
Total length (cm): 147
Total width (cm): 71
Empty weight (kg): 153
Tyres
Drive wheels (mm): 13“ x 5“ (3.5 bar)
Steering wheels (mm): 13“ x 5“ (3.5 bar)
Electrics
Main fuse (A): 70
Battery: 2 x 12V / 80Ah
Charger: 24VDC / 4A
Motor: DC 24 V / PEAK 700 W/4400rpm
Controller: Dynamic Rhino110 A
Light and indicators: conforms to the German Road
Traffic Licensing Regulations
Driving characteristics
Speed (km/h): 15 (standard)
Climbing capability (°): 12
Height of obstacles (mm): 40
Range (km): up to 64
Turning radius (cm): 194
Operating forces
Control lever: approx. 2 N
Pushbuttons on the
control panel: approx. 5 N
Disconnecting the drive
mechanisms: > 60 N
Equipment
Framework: powder-coated steel frame
Cover panels: plastic
Seat with headrest: imitation leather
Brake: 2 independent braking systems
conforms to the German Road Traffic
Licensing Regulations
6. Advice on product care
6.1 Cleaning and disinfection
Make sure your scooter is switched off before starting to clean it.
• The frame parts and coverings of the scooter can be wiped using
a damp cloth. In case of heavy soiling, use a mild cleaning agent.
• To clean the wheels use a damp brush with plastic bristles (do not
use a steel brush!).
• Use a damp cloth to remove dust and minor soiling off your seat,
backrest and armrests. Do not use any aggressive cleaning
agents, as they may affect the surface of the cloth. Cushions can
be wiped with 40°C warm water and disinfected with a commer-
cial disinfectant.
• Make sure that electric or electronic components do not come
into contact with water!
2322
Caution! Do not use a high-pressure or vapour
cleaning device.
Ethon
EN