Technical data

SAFETY TIPS
WARNING: SHARP BLADE AND MOVING PARTS!
To Avoid the Risk of Personal Injury, Follow These Safety Tips
When Installing, Using, Cleaning, or Otherwise Maintaining This
Slicer:
1. This slicer uses an extremely sharp blade. ALWAYS keep your hands away
from the edge of this blade, at all times.
2. NEVER use this slicer without reading this manual beforehand, without proper
training or when drowsy or not fully alert.
3. ALWAYS install the slicer on solid level support and only to the
manufacturer’s instructions contained in this manual.
4. ALWAYS connect the slicer to an AC wall socket using the three-pronged
plug provided. Use the ON-OFF to power the slicer. ALWAYS unplug the
slicer when cleaning or moving it.
5. NEVER remove any guards except as provided in this manual.
6. ALWAYS keep hands, arms, wrists, hair, loose clothing and jewelry clear of
all moving parts.
7. ALWAYS STOP using the slicer and unplug it from the power source in any
case of unusual noise, incorrect movement, vibration or other abnormalities.
Consult your equipment repairman or manager IMMEDIATELY.
8. ALWAYS keep Adjustment Thickness Knob in “0” mm position when not
using the slicer
9. ALWAYS use non-slip, cut resistant gloves when using, cleaning or
maintaining the slicer.
10. NEVER use the weight assembly to push the slicer carriage back and forth,
Use the (PUSH HANDLE) for this!
Additional warnings are contained throughout this manual. If any warning label
On the slicer comes off or becomes unreadable, Contact Biro for an immediate
replacement.
3