Technical data

SLICE THICKNESS ADJUSTMENT KNOB
• Rotate the slice thickness adjustment knob counter-clockwise until it reaches its
“thickest” position (25 mm). Rotate the knob clockwise to the “0” mm or closed
position.
•
ALWAYS use the Start/Stop Button to operate the slicer. NEVER use a
wall mounted or other switch to turn the slicer on or off.
SLICER CARRIAGE
• Using the carriage handle, move the carriage back and forth to ensure it moves
smoothly and without obstruction
FUNCTIONAL TEST
• Make sure that the slice thickness adjustment knob is correctly positioned to “0”.
• Draw back the carriage completely (towards the operator) to loading position.
• Lift the pusher by pulling it away (approximately 4” or 10 cm) from the blade, put
the pusher in the rest position.
• Lay the test product to be sliced against the gauge plate on the operator side.
• Secure the pusher by exerting slight pressure.
• Adjust the thickness adjustment knob, Start the blade by pressing the green Start
button. (Make sure power light is illuminated.)
• Grip the handle on the plate and start the forward and backward cutting
movement. The product travels toward the gauge plate by gravity.
• When finished testing the slicer, return the adjustment knob to “0” and pull the
carriage back.
• Stop the blade by pressing the stop button.
13