Technical data

UNPACKING AND INSTALLATION
WARNING: SHARP BLADE
To Avoid Risk of Personal Injury,
Keep Hands Away From Blade
While Unpacking Slicer.
OPENING THE BOX
On receipt, check packaging integrity. If packaging is ripped, torn or otherwise
disturbed, inform the shipping agent or your equipment dealer immediately.
To unpack the machine, proceed as follows:
• Open the box, and remove the Installation, Use and Maintenance Manual.
Review the manual, particularly the sections on Unpacking and Installation,
before proceeding to the next step.
• Cut the banding holding the machine to the internal wood support frame and lift
the machine out of the shipping box or container.
• Check the box contents and make sure it corresponds to what is shown on the
external label.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE
ENVIRONMENT !
The packaging components (cardboard, polythene, and others)
are classified as normal solid urban waste and can be
disposed of without difficulty. However, for suitable recycling,
dispose of the packaging materials separately (differentiated
according to local regulations.
waste)